The clutch is of the single dry disk type. The clutch assembly consists of the clutch disk assembly, clutch cover and pressure plate assembly, and clutch release mechanism. The clutch operating mechanism is a hydraulic type.
6-A. clutch pedal adjustment
The free travel of the clutch pedal should be between 20 to 30 mm (0.8 to 1.2 in). to adjust the free travel, loosen the lock nut and turn the push rod until proper adjustment is made.
6-B release fork adjustment
There should always be a safe clearance of 1.5 mm (0.06 in) between the release bearing and the diaphragm spring. This clearance is essential to disengange the release bearing and to prevent unnecessary wear and possible slippage. This clearance is obtained when the free play of the release fork is adjusted to 3.0 mm (0.12 in). to adjust remove the return spring. Loosen the lock nut, and turn the adjusting nut until the correct play is obtained.
After adjusting, securely tighten the lock nut and hook the return spring.
6-C. clutch removal